Vertical Injection Dual Working Stations with Separate Tank

BETA 800M

Vertical Injection Dual Working Stations with Separate Tank

User-friendly operation.
Dual independentworking stations.
Separate 7 liter melting tank. Multiple meltingtank is optional.
LPMS specially designed melt-on-demand tank can melt down the resin swiftly and evenly.
The gear pump is made of hard-wearing material，which is stable，injection volume accuracy ±0.1g，maximum shot size is 5.8g/s.
Injection pressure range 1~50kg, which can be controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely from the PLC.
Five thermal control zones for precise melt control.

Application

LPMS? machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.

The benefit of vertical injection is that when smaller parts allow the cavity to be split into two or four cavities. This allows shorter runners and higher output per cycle. It’s suitable for multiple cavity mold for cable, wire harness, LED, etc.

Specification

Machine Size / Weight	1300 mm x 780 mm x 1670 mm / 540 kg 51.18 in x 30.71 in x 65.75 in / 1190 lbs
Footprint	1300 mm x 1700 mm \| 51.18 in x 66.93 in
Working Station Height	850 mm \| 33.46 in
Packing Size / Weight	1370 mm x 910 mm x1750 mm / 580 kg 53.94 in x 35.83 in x 68.90 in / 1279 lbs
Melting Tank [1]	Melt on demand 7 literx 1
Auto Feeding System	Optional
Gun Model & Tip	LPMS-G08 x2 / 36.4°
Heated Hose[2]	1.6 mx 2
Electricity[3]	200-240VAC/1 Phase/50 Hz
Temperature Control Zones	5
Temperature Range	Ambient up to 250°C / 485°F
Max.Power	6Kw
Min. Air Pressure	0.5MPa \| 73 Psi
Air Consumption	0.18 m³ / min \| 6.3ft³ / min
Clamping	Air Cylinder
Clamping Force	Max.1.2 Ton
Clamping Stroke	150 mm \| 5.91 in
Control System	7 ”HMI , PLC controlled
Safety Protection	Light curtain, emergency stop button
Std. Mold Set Size	230 mm x120 mm x150 mm / 25 kg 9.06 in x4.72 in x5.91 in / 55.12 lbs
Max . Mold Set Size	300 mm x 200 mm x150 mm 11.81 in x7.87 in x 5.90 in